Валюта
EUR
Search
Расширенный поиск
Моя корзина 0
Pacific R180S Radiator Pacific R180S Radiator Pacific R180S Radiator Pacific R180S Radiator
Pacific R180S Radiator

Pacific R180S Radiator

Нет в наличии
P/N
CL-W023-AL00BL-A
54,90 € (included VAT)

The Pacific R180S 180mm slim radiator with flat tube design to increase heat transfer.

Thermaltake Pacific R180S Radiator
The Thermaltake Pacific R180S radiator introduces high-quality radiators to deliver outstanding water cooling performance for the enthusiast’s PC. Manufactured from high-quality German aluminum alloy and aerospace-grade materials, configurations of 180mm, 360mm, and 540mm are available to provide exceptional performance. Integrated G1/4" threads make it easy to install, while rigid connections ensure leak-resistant measures are in place. With an ideal mounting, fitting and flow set-up, the Thermaltake Pacific R180S radiator meets your cooling needs in every way.
 
“Tt LCS Certified” is the hallmark that ensures first-class performance from the best features and fitment. A certification exclusive to Thermaltake, it sets the benchmark for all true LCS chassis and is applied only to products that meet our stringent design standards for delivering what hardcore enthusiasts demand. The Tt LCS certification is a way for Thermaltake to designate to all power users the chassis which have been tested for best compatibility with extreme liquid cooling configurations.
 
Optimized Heat Dispatching
Designed for the most demanding hardcore enthusiasts, the Thermaltake R180S radiator is optimized for maximum heat dispatching. They deliver an average heating load of 32℃-35℃ on each radiator. After brazing, the fin and tube connect to form a joint, thereby creating uniform heat transfer. By efficiently pulling heat away from the power-dissipating components, the radiators ensure component reliability.


Slim Form Factor Design
The Pacific R180S is a slim radiator with a 13-set flat tube design to increase heat transfer. Water flows down on the one side, then circulates back to the other side of the radiator.
 


High-Density Fin Design
Fin density is optimally designed to accommodate high air pressure. The cooling performance improves significantly with increased fan speed, offering exceptional cooling performance during operation. FPI (fin per inch): 13.
German-Made Anti-Corrosion Materials
Without compromise, the Pacific R180S is designed with high-quality German aerospace-grade materials and constructed with zinc, the most common anti-corrosion agent. Although this protection will gradually degrade as the zinc corrodes away over time, it provides the best means to reduce electronic conductivity and can withstand scratches to the zinc layer. Corrosion potentials of aluminum alloy with zinc can be reduced by 55.6% after brazing.
 
High-Quality Manufacturing Process: Brazing
An exceptional manufacturing process using high temperature brazing at 1022℉/550℃ sets Pacific R180S in a class of their own. This technique allows for impurities to be kept out of the brazing process, ensuring that full strength on all the connected areas is achieved. The radiators are baked through a controlled atmosphere brazing line. The materials melt into each other to accomplish optimal thermal transfer from the tubes to the actual fins in order to attain better heat evacuation.
Radiator Production Process Video
 
Remarkable Expansion
The Pacific R180S provides multiple sizes for users to build the ultimate in custom configurations. A wide array of radiator sizes are available for enthusiasts to build up aesthetically-superior water cooling systems by allocating the radiators to each particular component and incorporating externally-modular upgrades for their chassis.


Cautions:
Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks
  1. To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  2. Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  4. Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.


Thermaltake recommends the following steps to be taken after completing your water loop setup
  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  4. Fill the reservoir to the top as it will prevent air from going into the pump
  5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop

ВНИМАНИЕ

Рекомендуем ознакомиться с основными рекомендациями по эксплуатации компонентов системы для жидкостного охлаждения серии Pacific:

  • Перед сборкой системы жидкостного охлаждения, рекомендуется промыть компоненты дистиллированной водой.
  • Не используйте в качестве хладагента водопроводную или дистиллированную воду, так как это может вызвать коррозию и снизить эффективность охлаждения.
  • Крайне рекомендуется в качестве хладагента использовать специально предназначенные для этого жидкости, такие как Thermaltake Coolant 1000.
  • Перед хранением компонентов вашего СВО, их следует помыть и высушить. Это позволит продлить срок службы.

После сборки системы жидкостного охлаждения мы рекомендуем соблюдать следующие правила:

  • Крайне рекомендуется в качестве хладагента использовать специально предназначенную для этого жидкость, такую как Thermaltake Coolant 1000. Она препятствует появлению коррозии на всех металлических компонентах СВО и помогает обеспечить максимальную эффективность.
  • Заполните резервуар хладагентом и запустите систему. Как только помпа прокачает хладагент в контур, резервуар следует дополнить. Эту процедуру стоит повторить до тех пор, пока весь контур не заполнится хладагентом.
  • НЕ ДОПУСКАЙТЕ работу помпы при отсутствии хладагента.
  • Заполняйте полностью резервуар, чтобы избежать попадания воздуха в контур.
  • При необходимости следует наклонить систему в разные стороны, чтобы избавиться от остатков воздуха в контуре.
  • На начальном этапе эксплуатации установите бумажные салфетки под фитингами и всеми соединениями, чтобы удостовериться в отсутствии течи хладагента.
  • Запустите систему с открученной пробкой для залива жидкости и дайте поработать около 24 часов, чтобы полностью удалить воздух из контура.
  • Перед тем как собирать систему жидкостного охлаждения, тщательно промойте все компоненты водой, чтобы избавиться от остатков старого хладагента или других нежелательных частиц и грязи.
  • В процессе эксплуатации охлаждающая жидкость может тускнеть.
Подробная информация
P/N CL-W023-AL00BL-A
Dimensions 215.3 (L) x 179 (W) x 36 (H)
Вес 460 g
МАТЕРИАЛ Anti-Corrosion
Aluminum Alloy
FPI (Fin per inch) 13
Flat Tube 18 set
Parts Stopper * 2 (G 1/4 )
Screw Thread G 1/4 * 4